Because of the large factory area, the level of dust in construction is high, as well as the waste in the production process is extremely high.
The factory has too much dirt or toxic chemicals that are not handled early and properly, which will greatly affect the handover of the project. In addition, it affects the health and performance of workers. If the machine is too dusty, it will also be damaged very quickly.
The application of the factory cleaning process after construction is very important. However, it is necessary to pay attention to the factors of standards, tools and implementation procedures….
In fact, the standard lies in the order of implementation in one direction to ensure that the factory is completely removed from dust in a certain time. Factory cleaning needs to meet the following standards:
- Factory ceiling cleaning. This is the most complicated and difficult item to clean, because the person performing this work must operate at height.
- Clean the walls around the factory.
- The cable car system is the third sanitary item.
- Next is cleaning the system of light troughs, light boxes and lights arranged around the factory.
- The next factory hygiene standard is the ventilation fan and ceiling fan system.
- Finally, clean the entire floor, machinery, equipment, workplace in the factory.
The factory cleaning process is carried out based on the sequence of hygiene standards in turn as follows:
The ceiling height of the factory ranges from 8 to 12m, the cleaning needs to be fully equipped with labor protection equipment such as hats, hats, shoes, safety belts. At the same time, there must be the support of forklifts - lowering to ensure that the ceiling area is cleaned easily and cleanly.
At the position around the factory wall, it is necessary to wipe away the thermal film of dirt and dust on the surface and clean or blow the dust again.
Factory machinery will collect a lot of dust during construction and should be cleaned properly. Depending on the type of machine and equipment, there will be different cleaning methods. Because each type of machine will have a different structure and material, this item always needs consultation and support from the factory technician. This not only helps to keep the machine completely clean, but also ensures that it can work normally again.
Cleaning the factory floor will take a long time. Because the floor is the place where many dirt and different chemicals are discharged from the construction process and production machinery. That's why this work needs meticulousness. This will become easier when using specialized machines and the right cleaning solution. Therefore, the selection of cleaning chemicals for the floor must ensure the right type to achieve the best cleaning effect.
The last but equally important step is to look at the whole factory and see if there are any areas that are not clean that require cleaning. As a result, the acceptance test is done when the factory cleaning process has been carried out to ensure that all areas are cleaned, without any dust, grease, chemicals.
+ The cleaning process must comply with regulations on occupational safety.
+ Fully equipped with protective equipment such as boots, shoes, gloves, hats, shirts, ...
+ Do not use water to clean electrical machinery and equipment.
Keeping the factory as beautiful as new during use is the responsibility of every business. Regular cleaning of the factory in the right way, in accordance with the right process, helps to improve the working environment for employees, creating better conditions for preserving raw materials and finished products. At the same time prolong the life of machinery and equipment as well as improve working efficiency.
