The layout of 5x5m floor tiles is specialized in the field of construction set as the standard applied in all factory buildings today. What are the benefits of the layout of 5x5 floor tiles, let's find out the necessary information through this article.
This is the main term used to talk about the layout of 5x5m steel floor tiles that can be visualized as a horizontal bar that acts as a force-bearing structure with two knees on a column or wall, transmitting the load from the roof or floor to the ground. beams to reach a column or wall. Arrange the steel floor tiles horizontally and vertically, and even add beams so that they can use force when they want to expand.
The girder is made up of mainly steel because of its good bearing capacity, composed of main girder and auxiliary beam, the main girder has the largest size of all beams. When choosing steel as a beam, it is based on the load-bearing capacity of the steel to choose accordingly.
Usually make the umbrella in size 5m, 7m and 9m. Which step size one can make depends on the workshop area
The arrangement of 5x5m floor tiles to meet the standards is important because it determines the quality of the work, the sustainability in construction and the safety factors. First of all, there should be a detailed drawing, carefully calculated from the expert dog engineers during the design process, then the layout must be exactly according to the planned drawing.
For construction works with a relatively large area, it is necessary to ensure the usual cross-section of columns and beams (columns 200x350, 2 phi 16 + 2phi14 in the middle of the span and girder bearing). Depending on economic conditions increase steel. This is considered the most suitable layout depending on the investment cost of the item.
A 5x5m steel layout is applied based on the surrounding factories to find the disadvantages and overcome if there are any, thereby providing a solution to arrange the floor tile according to the size that is the most accurate. Learn layout from steel comb number, size, scale, texture. This way not only arranges the 5x5m floor tiles most accurately, but also saves costs and brings high practical efficiency.
For humid conditions, it is recommended to choose reinforced concrete compartments with easy drainage or trapezoidal or triangular trusses.
When arranging steel beams with span 5x5m, it is necessary to test certain principles to ensure that the work is completed with the best quality.
Positive moment of tensile reinforcement AS at the lower part of the negative moment at the top
For areas that have been correctly calculated on how to choose to place steel columns, you need to pay attention to place them in the part with the largest moment area. You should make some cuts of steel bars or can bend roaming to reduce the cross-sectional area and also the amount of steel used. Save costs while still ensuring the quality of the work.
Ensure that after roaming or reducing, the remaining amount of steel has sufficient bearing capacity. In straight cross sections and inclined sections, bending moment should be observed.
Note that the load-bearing reinforcement should be firmly at the top of each bar, to ensure that it can withstand the force and keep it stable.
