What is the unit cost of pouring concrete for the factory floor? What is the unit price of 1m2 of reinforced concrete floor? The pouring of the concrete floor takes place quickly and certainly requires careful preparation.
- Prepare human resources, equipment and machinery throughout the concreting process without interruption.
- Calculate the exact time of the concrete pouring ground
- Comply with safety regulations during construction
- Clean up, especially flush with water to clean the rebar
- Checking reinforced scaffolding and construction equipment
- Check the quality and quantity of dwungj building materials, supporting machinery and equipment, concrete mixers, floor grinders
- For floors thinner than 30cm, use a table compactor. Thicker floors should use vibrating compactors
- Concrete poured floor must meet the standards of smoothness and not flooded. Regularly check to be able to coordinate with the contractor to solve the problem in the best way.
Depending on beam aperture and construction materials, the cost for 1m2 of concrete floor ranges from 560,000 VND/m2 beam aperture P114 from 1m - 3.9m counting 6560,000 VND/m2 beam aperture P113 from 4m - 4.7m . The unit price applies to small-scale projects.
From this unit price, it is possible to answer the question of how much is the unit price of 1 m2 of reinforced concrete floor. This is also just a reference unit price in 2022 for the investor about the approximate estimate when carrying out the construction of this item.
During the construction process, many years of practical experience show that the cost of pouring reinforced concrete floors is influenced and influenced by the following factors:
Construction time is the first and most important factor that directly affects the construction price of reinforced concrete floors. At the peak time of construction, construction prices will definitely increase compared to normal or low season
Construction unit: The construction unit determines the quality and total price of the factory construction, which will be optimized from the significant factory construction solutions while still ensuring the durability of the work when put into operation.
Floor area: Large floor area, of course, requires a lot of construction materials and a large amount of money. Besides, arising from the request to pour the ceiling or roof, the cost of pouring the floor will be increased.
Construction materials used: in addition to the basic floor materials, they are mixed with other additives. Construction costs will vary depending on the materials used.
Construction method is one of the factors affecting the cost of pouring concrete floors.
During the construction process, it is necessary to pay attention to the factors affecting the quality of the item results
+ Weather chooses sunny and dry time
+ Continuous construction so that the floor is durable, the construction process must take place quickly and without interruption
+ Check the floor block before pouring concrete to ensure that the floor block at the place of pouring must be flat
+ To increase the strength of the concrete mark, it is necessary to keep the concrete moist after pouring for 7 consecutive days and then cure it for 28 days.
+ Occupational safety: pay attention to technique and put labor safety first.
