Every factory is designed with the roof of the factory, but few people find out what the effect of the roof of the factory is for. The fact shows that the roof is the place to accumulate all the heat of the factory and is a decisive factor for evaporating water vapor to the outside space, moisture for goods and air circulation for the factory.
The roof of the factory is the item you can imagine this is a detail for air circulation for industrial factories. Part of the attic floor that helps to circulate air for the factory. Are static ventilation systems because they have no mechanical moving parts or require electrical or solar energy to operate.
Arranging the air intake and releasing the air in a reasonable way will help the best air circulation. The roof of the wind is also known as the ventilation roof or the air vent.
The roof of the factory is an essential detail for the factory because of the benefits it brings
Using the roof of the factory is an effective cooling method that saves energy. The roof is designed to be fixed on the roof and does not use extra electricity to operate.
Wind roof does not use electricity or solar energy to operate. Loss of initial design and assembly costs, zero operating costs, and significant savings in monthly management costs.
The roof is rarely damaged without needing to be replaced, and requires little repair and maintenance. Repair is also easy to do.
Businesses should periodically check for damage or not. Ruggedness or rust in preparation for repair or replacement. Rooftop cost is low and easy to buy.
The attic is the place to accumulate all the heat of the factory because when put into operation, workers and machines generate a large amount of heat, CO2 is lighter than air, so it will rise and accumulate in the attic along with steam. country. Installing a wind roof will facilitate continuous air circulation through every truss cozy air moisture will automatically escape.
This process creates a difference in pressure. Cool air from the side enters the factory through the window louvers and replaces the newly released air to create a balanced circulation of cool air in the factory. This saves cooling costs to support fan or air conditioning systems inside the factory in the most natural way.
In addition, the roof of the factory also has the effect of preventing water from flowing in during the winter, while keeping the air cool and well-ventilated despite adverse weather outside.
In today's factory construction design, it is often designed according to 2 models of wind roofs.
+ Side-exit wind roof: the wind roof has slopes on both sides to drain rainwater. Hot air escapes below the roof corrugated iron.
+ The roof of the factory has a vertical outlet form: The roof sheet is placed at a 90-degree square root with the roof. Hot air peels up and exits vertically at the vent.
Natural factory wind system: Coordinates ventilation for the working environment by arranging doors to take in fresh air and discharge dust in a reasonable way.
Low investment cost
The disadvantage is that the performance is not high depending on the location of the factory to catch the wind direction, the workshop space and the weather...
Arrange the wind bar to get the air and exhaust the dirty air symmetrically to bring the best effect. Requires the wind bar to cover the rain. Use a ventilation ball on the roof to create ventilation inside the factory.
Ventilation system with roof
This method is a bit like the natural method. Instead of placing the wind bar at the two ends, the method of the roof of the wind at one end uses the wind bar to get air when entering. The other end uses an exhaust fan to push the outside air and fresh air from the outside will follow the wind bar to the inside of the factory.
Factory roof ventilation system using air ducts
The same method uses air ducts and exhaust fans. The advantage of a ventilation system using a wind channel is that it can take in arbitrary air at any point
Ventilation system combined with factory cooling
A fairly common method of taking fresh air outside is cooled by fan equipment and then blowing it straight into the factory. At that time, the hot air and dust inside the factory will be pushed out, creating a ventilated and cool working environment.
When choosing the roof, pay attention
The roof is not a completely closed system, so when installing or choosing a business, it should be noted:
+ Ventilation efficiency is not high because the ventilation area is limited and depends on natural wind conditions, so it should be combined with cooling measures to increase ventilation efficiency.
+ Choosing a suitable mounting position, the opening in the roof may have dust flying into the workshop, so the workshop near a dusty place should be considered before installation.
See more: Quotation for factory construction 2021
Why choose BIC for construction to execute the condominium project?
1. Team of human resources - engineers - architects - workers with extensive experience in executing the condominium project
2. BIC always has enthusiasm and always put the mind - reputation as the top.
3. Construction process is strictly managed and safe.
4. With strict control in construction, the construction schedule should always be ensured.
5. Price is suitable for each project implemented.
6. Free and enthusiastic advice - dedicated.
Please contact BIC at hotline: 0901.815.069 for a free consultation!
BIC is a company specializing in the design and construction of high-quality factories, pre-engineered steel buildings and industrial warehouses. In addition, BIC also designs and constructs office buildings, condominiums, participates in surveys,....
BIC has participated in many construction projects across the country. We have had many experiences in building large-scale projects of famous investors from countries around the world such as Japan, Korean, Taiwan, America (USA), Singapore, .. ..
The reputation of BIC is increasingly strengthened as we become more and more known by the compliments about the professional, serious, entrepreneurial and honest working attitude. BIC is now a trusted brand for big name investors in Vietnam market.
Benefits of customers:
We have been implementing large-scale factory projects from 70,000 square meters to more than 200,000 square meters of foreign enterprises investing in Vietnam such as:Korean, Japan, Taiwan,.... We more and more efforts to become one of the leading brands in terms of prestige, project implementation capacity in Vietnam, reaching out to markets in countries in Southeast Asia and the World.
BIC is committed to providing customers with the best building service, office building, high-rise apartment building. By the enthusiasm and unrelenting efforts of all officials and employees. Especially, we have conquered many big projects and gained the confidence and satisfaction of the "Big Men" in the world who came to Vietnam to invest in the construction.
BIC is very pleased to serve you with the spirit:"COOPERATE TO DEVELOP TOGETHER"
BIC CONSTRUCTION ARCHITECTURAL JOINT STOCK COMPANY
Ho Chi Minh Branch:7th Floor, Gia Dinh group, 566 National Highway 13, P.Hiep Binh Phuoc, Thu Duc District, Ho Chi Minh City
☎️ Hotline: 0901.815.069
Mail marketing: marketing@bicons.vn
Hanoi Branch:4th Floor, HUD3 Tower, No. 121-123 Pho To Hieu, Ha Dong District - Hanoi.
☎️ Hotline: 0243.91.92.789
Mail: bic@bicons.vn - Fax: (028) 38 800 892
Mail marketing: marketing@bicons.vn
