Structural solutions for industrial buildings are offered with cost-effective advantages to meet design and erection requirements so that the commitment to construction quality is guaranteed.
Pre-engineered steel buildings are created on a prefab foundation. The entire structure has a tight connection to ensure the quality for the whole project, following the standards is a must.
Industrial structural solutions help control the quality of the work and at the same time assess the prestige and capacity of the construction contractor.
Industrial construction are all activities under the management of the state. The construction and putting of works into use are not only issues related to the owners but have a direct impact on the community and society.
Steel structures must be designed to meet the general requirements specified for the Regulation. Compulsory regulations applied to construction activities shall be promulgated by competent construction management agencies.
Two important issues raised by this standard are to ensure the safety of bearing and to ensure normal usability throughout the shelf life.
TCVN 197: 2022, Metal. Tensile test method.P
TCVN 198:2008, Metal. Self-bending method.
TCVN 312:2007, Metal. Normal temperature impact bending test method
TCVN 313:1985, Metal. Torsion test method.
TCVN 1691:1975, Manual electric arc welding. Basic style and size.
TCVN 1765:1975, Ordinary structural carbon steel. Steel grades and technical requirements.
TCVN 1766: 1975, Good quality structural carbon steel. Steel grades and technical requirements.
TCVN 1916: 1995: Bolts, screws, studs and nuts. Technical requirements
TCVN 2737:1995, Loads and impacts. Design standards
TCVN 3104:1979, Low alloy structural steel. Mark, technical requirements.
TCVN 3223: 2000, Electric welding rods for low carbon steel and low alloy steel. Test method.
TCVN 5400:1991, Welds. General requirements for sampling for mechanical testing
TCVN 5401:1991, Welds. Bending test method
TCVN 5402: 2010, Welding joints. Bending and impact test method
TCVN 5709:2009, Hot rolled carbon steel used as structure in construction. Technical requirements.
TCVN 6522:2008, Hot rolled structural steel plate.
Revolving around the problem of steel structure quality, there are specific requirements that must be followed.
Explosion-proof standards for corrosion protection
It is not allowed to arbitrarily increase the thickness of steel, but must calculate according to the formula published in the construction standard
Detailed and accurate load calculations. Including the most unfavorable load combinations due to time effects and other influencing factors.
Design drawings of steel structures must show details of standards, mechanical features, and chemical composition of steel materials.
In the construction of industrial steel structures, steel is the key material. Steel production standards will be an extremely important issue, having a decisive influence on the quality of works.
Quality solutions for industrial steel buildings
The characteristics of steel materials are susceptible to the impact of the surrounding environment. The durability of the architecture will decrease over time. The damage process will happen faster if you do not maintain it regularly.
The foundation is an important part of the work located under the ground, supporting the entire building. Subject to the direct corrosion of chemicals in the soil, wastewater... So during the construction process, it is necessary to pay close attention and monitor carefully. Increase the foundation structure to improve the quality of industrial steel buildings.
These works have a steel pillar frame, designed according to standard technical structure drawings.
+ Design of pillars and drawings
+ Components processing
+ Carrying out the erection of piers at the construction site
The weight of industrial steel buildings is lighter than other methods but still ensures a solid factor.
Highly applicable, more flexible in construction and repair
Much lower cost
Support for rapid installation speeding up construction completion
Save a lot of expenses incurred
Increased durability and service life during use.
