Making factory corrugated iron roof at the request of the investor and applying the factory corrugated iron roof samples that the contractor prefers corrugated iron over other types of roof
The part that covers the top part of the factory is usually made from corrugated iron sheets. This material is popular for construction, helping to protect buildings from the impact of weather, wind, rain, sunshine, dust, etc. Ton is made from a variety of materials, especially thin-rolled steel, and then galvanized to increase it. reliability.
Depending on different materials, different types of corrugated iron roofs will have different advantages and disadvantages. In general, corrugated iron roof is a lightweight material with many colors and eye-catching designs. Corrugated iron roofing sheets have a lifespan of up to 50 years much higher than plastic roofing sheets. The corrugated iron roof also has a very effective cooling effect on the factory roof. Criteria to note: durability of the product, aesthetics and cost.
The preferred roof structure, the corrugated iron roof has a fairly simple and flexible structure consisting of 3 main parts
+ Frame system: including iron box and iron pipe body bearing the largest load in 3 parts. Designing the frame of the design unit should pay attention to the selection of materials suitable to the area, scale and specific characteristics of each type of workshop. The new frame system fulfills its task well and ensures durability and longevity for the entire building.
.jpg)
+ Truss system: corrugated iron roofing system is the same as the design and construction frame system of the roofing system. The unit pays attention to the area of the roof and the type of material so that the product created is of high quality and has enough capacity. anti-glare and construction protection.
+ Screw system: For the corrugated iron roof, investors need to prioritize chrome-plated stainless steel screws with outstanding advantages of high hardness and good corrosion resistance. The master cushion system needs to be tight to prevent rainwater from seeping inside. Glue can be added to increase the durability of the entire system.
In order for a factory to ensure the quality of the corrugated iron roof, it must be designed according to standards and use the appropriate type of corrugated iron
5 wave square corrugated iron: Usually used for roofing with large wave height, so it is resistant to water overflow. Large waves have additional waves to help increase the level of worship for the corrugated iron. Allows the design of purlins with a large distance, but the safety is still higher than other types of corrugated iron, saving costs for purlins.
7 wave square corrugated iron: Low beam height, so it is often used to make partitions. Between the large bars, there are also extra bars to increase rigidity. The auxiliary waves also help the corrugated iron not be deformed and move more easily.
9-wave square corrugated iron: Has low wave height but a large number of waves should be used as a partition. The 9-wave corrugated iron has a beautiful surface, the waves are not too high, so it can increase the aesthetics of the building.
Cliplock corrugated iron: Used for roofing, has a large wave height and does not require screws when installed. Has excellent leak resistance
Seamlock corrugated iron: used for factory roofs without screws and without screws when installing. Seamlock corrugated iron has a large wave height of up to 84 and absolute leak resistance.
Shine: good light, heat resistant and pressure resistant, transparent and see-through. Light corrugated iron is used for both roof and partition.
It can be said that these are the most common types of corrugated iron for factories today. Choosing the right corrugated iron is extremely important for investors and contractors. The quality of corrugated iron characteristics will be related to the design points and the quality of the factory
The advantages can be seen during the application of corrugated iron roofs in factory construction.
+ Cost saving: Cost saving solution for investors, especially large area. Steel frame structure of corrugated iron roof is much lighter than other roofs. The costs of foundation materials and columns are also significantly reduced. Less accompanying materials and low maintenance costs also help investors save a lot.
+ Solid and safe: The steel frame and corrugated iron sheets are attached together by screws and welds extremely solid and safe. Corrugated iron roofs are highly durable and last for many years. If wood and reinforced concrete often crack over time, the corrugated iron roof is not easily affected by the outside environment. The corrugated iron roof is also always hygienic and environmentally friendly.
+ High application: Corrugated iron roof absorbs and reflects most of the sun's rays including UV rays. Make the factory space will be cooler
+ Save construction time: The roofing sheet is cut to the desired length, so it is convenient for installation. The corrugated iron roof is quite light in weight, so it is easy to transport and construct, thereby saving time and labor
+ High aesthetics: Roofing corrugated iron has many different designs and colors. Used as a building material to increase the aesthetics of the building.
