The roof of the factory where all the heat is accumulated and the decisive factor to release water vapor to the outside environment to avoid mold. Especially the factory has many machines and workers, the evaporation of moisture through the roof of the wind will often contribute to creating a cool working space inside the factory.
The roof is a part of the attic that circulates air for the factory. The roof is considered a static ventilation system, just arranging the air intake and exhaust ventilation in a reasonable way will help the best air circulation. The roof of the wind is also known as the ventilation roof or the air vent.
+ Good air circulation
With a continuous operating capacity and a large number of workers, the amount of heat generated is extremely large. When the heat generated is too large, it will accumulate on the roof of the factory. Therefore, the requirement is to make it easier to escape that amount of heat. Installing the wind roof will create the most favorable conditions for the circulation of heat and rain.
The roof of the factory is a place to escape heat and bring fresh outside air into a cool and ventilated factory. In rainy weather, the roof will prevent water from flowing inside, which will not affect the machinery that can store goods.
Save electricity
The release of air when ventilated without installing too many electrical equipment still ensures the function to help businesses save on cooling costs with other devices. The design of the wind roof on the roof of the factory without using electricity is one of the optimal solutions.
The roof of the factory is usually fixed and not affected by engines, so there is very little damage. As well as no need to replace new, less need to repair or regularly check and maintain. The structure of the roof of the workshop is not too complicated, so the repair is very easy.
Common industrial factory roof
The roof of the vertical escapement is placed at a 90-degree perpendicular to the roof. When the hot air rises, it still escapes out in the vertical direction of the wind.
The side-exit roof has a slope to both sides to quickly drain rainwater. Hot air escapes under the roof sheet.
The roof is not a completely closed system, so when installing or choosing a business, it should be kept in mind.
+ Choosing a suitable mounting position for the opening of the roof may have dust flying into the factory, so the factory near a dusty place should be considered.
+ Ventilation efficiency is not high, the area of the roof is limited and depends on natural wind conditions, businesses should combine with other measures to increase ventilation and cooling efficiency
